Predicting the mechanical properties of Cu–Al2O3 nanocomposites using machine learning and finite element simulation of indentation experiments

Micromechanics model, finite element (FE) simulation of microindentation and machine learning were deployed to predict the mechanical properties of Cu–Al₂O₃ nanocomposites. The micromechanical model was developed based on the rule of mixture and grain and grain boundary sizes evolution to predict the elastic modulus of the produced nanocomposites. Then, a FE model was developed to simulate the microindentation test. The input for the FE model was the elastic modulus that was computed using the micromechanics model and wide range of yield and tangent stresses values. Finally, the output load-displacement response from the FE model, the elastic modulus, the yield and tangent strengths used for the FE simulations, and the residual indentation depth were used to train the machine learning model (Random vector functional link network) for the prediction of the yield and tangent stresses of the produced nanocomposites. Cu–Al₂O₃ nanocomposites with different Al₂O₃ concentration were manufactured using insitu chemical method to validate the proposed model. After training the model, the microindentation experimental load-displacement curve for Cu–Al₂O₃ nanocomposites was fed to the machine learning model and the mechanical properties were obtained. The obtained mechanical properties were in very good agreement with the experimental ones achieving 0.99 coefficient of determination R2 for the yield strength.     

基于边图的线性流重叠社区发现算法

重叠网络的社区发现是复杂网络研究中的重要问题。为了提高网络中重叠社区发现的时间效率，提出一种基于边图的线性流重叠社区发现算法LBSA。算法首先对于边图网络中的边进行随机的依次处理，完成节点的初步社区划分，再将其中重叠小社区合并到相似度最大的其他大社区中得到最终的社区。通过以上步骤，算法能够以接近线性的时间复杂度得到网络的重叠结构。从最终的实验结果来看，与其他算法相比，该算法能够在更短的时间有质量地发现网络中的重叠社区。     

基于链接相似度和作弊系数的Spam网页识别算法

Spam网页主要通过链接作弊手段达到提高搜索排名而获利的目的,根据链接作弊的特征,引入链接相似度和作弊系数两个指标来判定网页作弊的可能性。借鉴BadRank算法思想,从Spam网页种子集合通过迭代计算链接相似度和作弊系数,并根据与种子集合的链接指向关系设置权重,将待判定的网页进行度量。最后选取Anti-Trust Rank等算法作对比实验,结果验证了本文算法在准确率和适应性方面优于对比算法。     

低速电机驱动翻板机构的设计与校核

介绍一种低速电机驱动连杆机构来实现接水翻板的运行,连杆机构设计为反平行四边形机构,由一台低速电机作为动力源、连杆作为执行机构、推动翻板打开与合拢,实现翻板接水工作,从而保证压滤机各工艺的正常。此方案结构简单,成本低廉,运行稳定可靠。     

Improved error performance for generalised spatial modulation with enhanced spectral efficiency

The existing analytical average bit error rate (ABER) expression of conventional generalised spatial modulation (CGSM) does not agree well with the Monte Carlo simulation results in the low signal‐to‐noise ratio (SNR) region. Hence, the first contribution of this paper is to derive a new and easy way to evaluate analytical ABER expression that improves the validation of the simulation results at low SNRs. Secondly, a novel system termed CGSM with enhanced spectral efficiency (CGSM‐ESE) is presented. This system is realised by applying a rotation angle to one of the two active transmit antennas. As a result, the overall spectral efficiency is increased by 1 bit/s/Hz when compared with the equivalent CGSM system. In order to validate the simulation results of CGSM‐ESE, the third contribution is to derive an analytical ABER expression. Finally, to improve the ABER performance of CGSM‐ESE, three link adaptation algorithms are developed. By assuming full knowledge of the channel at the receiver, the proposed algorithms select a subset of channel gain vector (CGV) pairs based on the Euclidean distance between all CGV pairs, CGV splitting, CGV amplitudes, or a combination of these.     

Three-phased clustered topology formation for Aeronautical Ad-Hoc Networks

In-Flight Internet Connectivity (IFC) has become one of the crucial needs of passengers with technological improvements. The Aeronautical Ad-hoc Networks (AANETs) have been proposed by establishing air-to-air (A2A) links between aircraft to satisfy this need. However, the unstructured aircraft topology caused by their ultra-dynamic characteristics reduces the longevity of A2A links in AANET. This shorter longevity decreases the stability of AANET by accelerating the connection establishment/termination procedures between aircraft. Additionally, the shorter link longevity affects the packet transfer delay and the delivery ratio of AANET. To the best of our knowledge, these three challenges are not investigated simultaneously under one topology management model. This paper proposes a three-phased topology formation model for AANETs to increase the stability and packet delivery ratio in AANET with a shorter packet transfer delay. The first phase corresponds to the aircraft clustering formation, and here, we aim to increase the AANET stability by creating spatially correlated clusters. The second phase consists of the A2A link determination for reducing the packet transfer delay. Finally, the cluster head selection increases the packet delivery ratio in AANET. According to our simulations, we see that the stability and packet delivery ratio of AANET topology are roughly improved 35% and 31% with a 28% delay reduction compared to the methods in the literature.     

小议经济型异构播出系统

电视播出系统的稳定性与安全性直接关系到电视播出的效果。结合实践经验,对经济型异构播出系统的构建进行介绍。     

水平弯曲线摩擦带式输送机的研制

介绍了将带式输送机的弯曲运行理论和线摩擦传动理论有机结合而研制的新型水平弯曲线摩擦多点驱动带式输送机,成功解决了长距离、小空间、大角度、低强度普通带式输送机的转弯运行问题。     

弧齿式与锯齿式接链环的比较

分析了锯齿式接链环结构的不合理性和其换代产品弧齿式接链环结构的合理性,并对两者的技术性能、使用寿命等进行了比较分析,认为弧齿式接链环具有较高的破断强度和疲劳强度,是目前井下使用的接链环更新换代的最佳产品。     

矿山地质探矿应重视的三个问题

论述了勘探网度、工程施工方案和探采结合等三个问题在地质探矿阶段的应用,并提出一些工作思路和方法。